Northern Plains Equipment Co., Inc.

Address: 2933 Twin City Drive - PO Box 804, Mandan, ND 58554
Telephone: 800-223-2972 or 701-663-9864     Fax: 701-663-9493
Email: Marc Taylor - marc@northernplainsequipment.com

Hours: M-F: Summer - 7am to 6pm & Sat: 8am to 2pm - March - October (weather permitted)
               M-F: Winter -  8am to 5:30pm & Sat: 8am to 12pm - November - February

         
 

Home  Company Table of Contents Our Story Sales Sales News Used Equipment
Wholegoods Spare Parts Parts CaseIH Parts Online Service Office Employment  

 


SERVICE DEPARTMENT

Email:  Casey Rose - casey@northernplainsequipment.com

WELCOME

Greetings to you from the Service Department.  We are here to provide you with qualified experience and keep your equipment operating at peak performance.  We will schedule your repair work in our shop or a service call to your farm.  We have a service truck for all those in the field break downs.  Meet our qualified staff below, then check out our service specials and service news below.
 


Casey Rose
Service Manager
1/15/2001



Sam Buckley
Service Writer
3/9/1998

 


Joe Schlinger
Technician
4/13/1987


Don Weikum
Technician
1/13/1997


Wade Mutschelknaus
Technician
5/15/2000

 


Brad Suchy
Technician
2/25/2002


Troy Klein
Truck Driver
3/17/2009


Josh Pochant
Technician
5/18/2009

 


Justin Cofer
Technician
5/18/2009
 


 

Priority Service Specials

Get your equipment in tip-top shape for a trouble free season.

Tractors:

Two Wheel Tractors:
58 point inspection, tractor washed/cab cleaned, engine oil analysis, transmission oil analysis, dyno test.

Four Wheel Tractors: 
58 point inspection, tractor washed/cab cleaned, engine oil analysis, transmission oil analysis.

Combine:
130 point inspection, combine washed/cab cleaned, engine oil analysis, hydro oil analysis.

We will also inspect:
Balers:
47 Point Inspection

Mower Conditioners: 

Air Seeders:  34 Point Inspection, on your farm.

Sprayers:  45 Point Inspection

Call for special pricing.

Service Department reminders for you:

Magnum owners and 90, 94, and 96 Series owners:

Check your owners manual for recommended service intervals to be performed.

The Magnum owners manual recommends that you adjust the valves at 1000 hrs. and check injectors at 2000 hrs.  This is one area that is very frequently overlooked.  Other important time intervals from the Magnum manual are:
        Engine oil & filters (we recommend 100 hrs.)                            250 hrs.
        Fuel filters - primary, secondary and in line                                500 hrs.
        Coolant & conditioner                                                                 2000 hrs.
        Coolant filter                                                                                   500 hrs.
        Transmission/hydraulic oil                                                          1500 hrs.
        Front differentials & planetaries (first change at 50 hrs.)        1000 hrs.
        Air filters                                                                                       1000 hrs.

We perform
"The Top End Tune-up"  which consists of :
        Adjustment of intake and exhaust valves.
        Check injection pump timing.
        Remove & test injectors.
        Replace - injector seals, valve cover gasket, injector sleeves and o-rings & washers.
        (Injectors and other parts are extra.)

 

CASE, VERSATILE, FORD & STEIGER OWNERS

Northern Plains Equipment Co., Inc. is your "Ag Certified" Cummins dealer. We can do the necessary work required for all Ag Series Cummins Engines. We are qualified for all Cummins work from top end tune ups to full overhauls. Have us service your Cummins Powered Equipment, TODAY.

Power Shift Service Special:

2090-2290 Case Tractors

Split tractor, remove power shift, reseal and install new clutch discs and test drive. Any additional repairs needed are extra.

Northern Plains Equipment Co., Inc.
Copyright © 1999.  All rights reserved.
Revised: 02/19/2010